TJ's Taylor Rental

1500lb capacity.

 

100 amp engine start; 15 amp fast charge; 2 amp slow charge.

Contractor quality mechanical jack for all-purpose lifts and supports. Holds heavy loads indefinitely - will not creep. Corrugated steel swivel head turns easily under load. Easy to carry and position with built-in handle.

Mechanical brake that keeps your come-a-long line from unwinding

Use it for tire rotation, removing and tightening lugs, brake work, and much more.

Easily remove the often rusted truck brake anchor pins.

Perfect for removing timing gears, fan pulleys, harmonic balancers, and many other parts having tapped holes.

Tool for cutting lally columns.

Compressor, McPherson Strut

Jet, 5,000 LB Capacity, Pallet Truck, Fork Size 27" x 48", This Is The Standard Size Pallet Truck For Most Applications, 2-1/2" Low Profile Design For Smaller Size Pallet Openings, High Quality Welded Steel Construction With A Durable Powder Coat Finish, Easy To Use With Single Hand Operation, Fingertip Controls & A 180 Degree Turning Radius

Jet, 3 Ton Capacity, Short Chassis Service Jack, Jet Model #JSJ-3X, Minimum Height 4-1/2", Maximum Height 21", Saddle 5-1/8" Diameter, Handle Length Is 37-3/4" In 2 Pieces, Features Automatic Safety Overload Bypass System, Full Swivel, Ball Bearing Rear Casters Are Positioned For Best Load Distribution & Optimal Maneuvering

Jet, 12-1/2 Ton Capacity, Industrial Hydraulic Bottle Jack, Jet Model #JHJ-12-1/2, Minimum Height 9-1/2", Maximum Height 18-1/2", Piston Height 5-7/8", For Lifting, Pushing, Spreading, Bending, Pressing Or Straightening, Not Affected By Temperature Extremes, Works In Upright, Angle Or Horizontal Position, Electrically Welded Base & Cylinders

Jet, Rebar Cutter/Bender, Cuts & Bends Grade 60 Rebar, Model #RCB-16NDLX, 5/8" Capacity, 52" Length, Can Be Bolted To Floor Or Board For Easy 1 Hand Operation, Patented Design Uses Needle Bearing For Easy Cutting, Jaw Type Is Shear Cut, Jaws Are Made Of High Carbon Alloy Tool Steel

2,000 LB Capacity, Transmission Jack, Jet Model #TJ-2000X, Minimum Height 8", Maximum Height 31", Designed For The Removal & Installation Of Auto & Light Truck Transmissions Or Transfer Cases

Jet, 1 Ton Capacity, Manual Chain Hoist, 10' Of Lift, All Steel Construction With A Durable Powder Coat Finish, Lightweight, Compact Design For Low Headroom Applications, Completely Enclosed Weston Type Automatic Brake System For Precise Load Spotting, Triple Spur Gears Provide High Efficiency Ratio With Minimum Effort, Drop Forged Hooks With Heavy Duty Safety Latches Swivel 360 Degrees For Easy Rigging, Proof Tested With Test Certificate,

Self contained electric over hydraulic tilt bed with hand control for power up and down

Perfect for project cars, unregistered cars, or race cars.

7,000 lb trailer.

Electric brakes and a 2 5/16" ball required.